Design and Biomechanical Analysis of Customized Angled Abutment Based on Tooth Inclination Angle for Immediate Implant Placement on Maxillary Anterior Region.

PURPOSE: Finite element analysis and an in vitro experiment were employed to investigate the loading effects of angled abutments, comparing various customized angled abutments derived from the average angle of incisors in patients with a commercial 15°∆ angled abutment, on both the implant and surrounding bone. METHODS: Four customized angled abutment models (21.9°∆, 24.15°∆, 20.22°∆, 33°∆) were developed using cone-beam computed tomography (CBCT) images of incisor inclination from various age groups of patients. 3D maxillary bone models were created from CBCT images of four individual patients. Finite element analysis and in-vitro strain gauge experiments were conducted, applying 100N or 50N of axial or oblique force, to assess the differences in stress/strain between the customized and the commercial 15°∆ angled abutments in both the implants and surrounding bone. RESULTS: Under axial loading, the stress values in the dental implant and surrounding bone were elevated due to the relatively higher angles of the customized angled abutments (21.9°∆, 24.15°∆, 20.22°∆, 33°∆) when compared to the commercial 15°∆ angled abutment; however, under oblique loading the commercial 15°∆angled abutment exhibited higher stress values in both the implant and surrounding bone. For in vitro experiment, there is no statically difference in bone strain between the customized (21.9°∆) and the commercial 15°∆ angled abutments in axial loading. Nevertheless, in oblique loading using a commercial 15°∆ angled abutment induced the higher bone strains. CONCLUSION: Customized angled abutments offer lower stress/strain under oblique loads but higher stress/strain under axial loads compared to commercial ones. Therefore, in the design and application of angled abutments, careful consideration of the occlusal load direction is paramount for achieving biomechanical success of dental implant.

Defective Tungsten Oxides with Stacking Faults for Proton Exchange Membrane Green-Hydrogen Generation.

Defects can introduce atomic structural modulation and tailor performance of materials. Herein, it demonstrates that semiconductor WO3 with inert electrocatalytic behavior can be activated through defect-induced tensile strains. Structural characterizations reveal that when simply treated in Ar/H2 atmosphere, oxygen vacancies will generate in WO3 and cause defective structures. Stacking faults are found in defects, thus modulating electronic structure and transforming electrocatalytic-inert WO3 into highly active electrocatalysts. Density functional theory (DFT) calculations are performed to calculate *H adsorption energies on various WOx surfaces, revealing the oxygen vacancy composition and strain predicted to optimize the catalytic activity of hydrogen evolution reaction (HER). Such defective tungsten oxides can be integrated into commercial proton exchange membrane (PEM) electrolyser with comparable performance toward Pt-based PEM. This work demonstrates defective metal oxides as promising non-noble metal catalysts for commercial PEM green-hydrogen generation.

Application of a circular-shaped pulsed field ablation catheter with magnetic sensors for pulmonary vein isolation: a multi-centre clinical study report.

AIMS: A few studies have reported the effect and safety of pulsed field ablation (PFA) catheters for ablating atrial fibrillation (AF), which were mainly based on basket-shaped or flower-shaped designs. However, the clinical application of a circular-shaped multi-electrode catheter with magnetic sensors is very limited. To study the efficacy and safety of a PFA system in patients with paroxysmal AF using a circular-shaped multi-electrode catheter equipped with magnetic sensors for pulmonary vein isolation (PVI). METHODS AND RESULTS: A novel proprietary bipolar PFA system was used for PVI, which utilized a circular-shaped multi-electrode catheter with magnetic sensors and allowed for three-dimensional model reconstruction, mapping, and ablation in one map. To evaluate the efficacy, efficiency, and safety of this PFA system, a prospective, multi-centre, single-armed, pre-market clinical study was performed. From July 2021 to December 2022, 151 patients with paroxysmal AF were included and underwent PVI. The study examined procedure time, immediate success rate, procedural success rate at 12 months, and relevant complications. In all 151 patients, all the pulmonary veins were acutely isolated using the studied system. Pulsed field ablation delivery was 78.4 ± 41.8 times and 31.3 ± 16.7 ms per patient. Skin-to-skin procedure time was 74.2 ± 29.8 min, and fluoroscopy time was 13.1 ± 7.6 min. The initial 11 (7.2%) cases underwent procedures with deep sedation anaesthesia, and the following cases underwent local anaesthesia. In the initial 11 cases, 4 cases (36.4%) presented transient vagal responses, and the rest were all successfully preventatively treated with atropine injection and rapid fluid infusion. No severe complications were found during or after the procedure. During follow-up, 3 cases experienced atrial flutter, and 11 cases had AF recurrence. The estimated 12-month Kaplan-Meier of freedom from arrhythmia was 88.4%. CONCLUSION: The PFA system, comprised of a circular PFA catheter with magnetic sensors, could rapidly achieve PVI under three-dimensional guidance and demonstrated excellent safety with comparable effects.

Teneligliptin mitigates diabetic cardiomyopathy by inhibiting activation of the NLRP3 inflammasome.

BACKGROUND: Diabetic cardiomyopathy (DCM), which is a complication of diabetes, poses a great threat to public health. Recent studies have confirmed the role of NLRP3 (NOD-like receptor protein 3) activation in DCM development through the inflammatory response. Teneligliptin is an oral hypoglycemic dipeptidyl peptidase-IV inhibitor used to treat diabetes. Teneligliptin has recently been reported to have anti-inflammatory and protective effects on myocardial cells. AIM: To examine the therapeutic effects of teneligliptin on DCM in diabetic mice. METHODS: Streptozotocin was administered to induce diabetes in mice, followed by treatment with 30 mg/kg teneligliptin. RESULTS: Marked increases in cardiomyocyte area and cardiac hypertrophy indicator heart weight/tibia length reductions in fractional shortening, ejection fraction, and heart rate; increases in creatine kinase-MB (CK-MB), aspartate transaminase (AST), and lactate dehydrogenase (LDH) levels; and upregulated NADPH oxidase 4 were observed in diabetic mice, all of which were significantly reversed by teneligliptin. Moreover, NLRP3 inflammasome activation and increased release of interleukin-1ß in diabetic mice were inhibited by teneligliptin. Primary mouse cardiomyocytes were treated with high glucose (30 mmol/L) with or without teneligliptin (2.5 or 5 µM) for 24 h. NLRP3 inflammasome activation. Increases in CK-MB, AST, and LDH levels in glucose-stimulated cardiomyocytes were markedly inhibited by teneligliptin, and AMP (p-adenosine 5'-monophosphate)-p-AMPK (activated protein kinase) levels were increased. Furthermore, the beneficial effects of teneligliptin on hyperglycaemia-induced cardiomyocytes were abolished by the AMPK signaling inhibitor compound C. CONCLUSION: Overall, teneligliptin mitigated DCM by mitigating activation of the NLRP3 inflammasome.

Effects of diameters of implant and abutment screw on stress distribution within dental implant and alveolar bone: A three-dimensional finite element analysis.

Background/purpose: Few studies have investigated the effects of abutment screw diameter in the stress of dental implants and alveolar bones under occlusal forces. In this study, we investigated how variations in implant diameter, abutment screw diameter, and bone condition affect stresses in the abutment screw, implant, and surrounding bone. Materials and methods: Three-dimensional finite element (FE) models were fabricated for dental implants with external hex-type abutments measuring 4 and 5 mm in diameter. The models also included abutment screws measuring 2.0 and 2.5 mm in diameter. Each implant model was integrated with the mandibular bone comprising the cortical bone and four types of cancellous bone. In total, 12 finite element models were generated, subjected to three different occlusal forces, and analyzed using FE software to investigate the stress distribution of dental implant and alveolar bone. Results: Wider implants demonstrated lower stresses in implant and bone compared with standard-diameter implants. The quality of cancellous bone has a minimal impact on the stress values of the implant, abutment screw, and cortical bone. Regardless of occlusal arrangement or quality of cancellous bone, a consistent pattern emerged: larger abutment screw diameters led to increased stress levels on the screws, while the stress levels in both cortical and cancellous bone showed comparatively minor fluctuations. Conclusion: Wider implants tend to have better stress distribution than standard-diameter implants. The potential advantage of augmenting the abutment screw diameter is unfavorable. It may result in elevated stresses in the implant system.

Advancements of Macrophages Involvement in Pathological Progression of Colitis-Associated Colorectal Cancer and Associated Pharmacological Interventions.

Intestinal macrophages play crucial roles in both intestinal inflammation and immune homeostasis. They can adopt two distinct phenotypes, primarily determined by environmental cues. These phenotypes encompass the classically activated pro-inflammatory M1 phenotype, as well as the alternatively activated anti-inflammatory M2 phenotype. In regular conditions, intestinal macrophages serve to shield the gut from inflammatory harm. However, when a combination of genetic and environmental elements influences the polarization of these macrophages, it can result in an M1/M2 macrophage activation imbalance, subsequently leading to a loss of control over intestinal inflammation. This shift transforms normal inflammatory responses into pathological damage within the intestines. In patients with ulcerative colitis-associated colorectal cancer (UC-CRC), disorders related to intestinal inflammation are closely correlated with an imbalance in the polarization of intestinal M1/M2 macrophages. Therefore, reinstating the equilibrium in M1/M2 macrophage polarization could potentially serve as an effective approach to the prevention and treatment of UC-CRC. This paper aims to scrutinize the clinical evidence regarding Chinese medicine (CM) in the treatment of UC-CRC, the pivotal role of macrophage polarization in UC-CRC pathogenesis, and the potential mechanisms through which CM regulates macrophage polarization to address UC-CRC. Our objective is to offer fresh perspectives for clinical application, fundamental research, and pharmaceutical advancement in UC-CRC.

Effects of an augmented reality aided system on the placement precision of orthodontic miniscrews: A pilot study.

Background/purpose: Augmented reality (AR) is gaining popularity in medical applications, which may aid clinicians in achieving improved clinical outcomes. The purpose of this study was to determine the positional and angle errors of orthodontic miniscrew placement by using a self-developed AR aided system. Materials and methods: Cone beam computed tomography (CBCT) and patient printed models were used in in vitro experiments. The participants were divided into a control group and an AR group, in which traditional orthodontic methods and the AR-aided system were used respectively. After the information obtained from the CBCT images and navigation system was combined on the display device, the AR-aided system indicated the planned miniscrew position to guide the clinicians during the placement of miniscrews. Both methods were compared by a senior and a junior dentist, and the position and angle of miniscrew placement were statistically analyzed using Wilcoxon's signed-rank and Mann-Whitney U tests. Results: When the AR-aided system was used, the accuracy of miniscrew placement in the mesiodistal position considerably increased (83%) when the procedure was performed by a senior clinician. In addition, the accuracy of miniscrew placement in the mesiodistal position and the angle of miniscrew placement considerably increased by approximately 67% and 72%, respectively, when the procedure was performed by a junior clinician. The position error of miniscrew placement was smaller for the junior clinician when the AR-aided system was used than for the senior clinician. Conclusion: The AR-aided system improved the accuracy of miniscrew placement regardless of the clinician's level of experience.

Analysis of mandibular molar anatomy in Taiwanese individuals using cone beam computed tomography.

Background/purpose: Before periapical surgery in the mandibular posterior teeth is performed, the thicknesses of the buccal alveolar bone wall and buccolingual root might be a critical issue. This study aimed to assess the anatomical structure of the posterior region of the mandible in Taiwanese individuals using cone-beam computed tomography (CBCT). Materials and methods: The CBCT images of 96 Taiwanese individuals (51 male and 45 female), which included 192 mandibular first molars and 192 mandibular second molars, were imported into medical imaging software to measure the buccal alveolar bone thickness and buccolingual root thickness at 3 mm above the root apex. Statistical analysis was conducted to examine the impact of tooth position, gender, and age on the anatomical position of mandibular molars. Results: The buccal alveolar bone thickness at 3 mm above the root apex of the mandibular second molar demonstrates a significantly higher value when compared to that of the first molar. Nonetheless, concerning the buccolingual root thickness, no significant differences were observed between these two teeth. In addition, the buccal alveolar bone thickness and buccolingual root thickness at 3 mm above the root apex may not be influenced by gender and age. Conclusion: The anatomical structures of the posterior region of the mandible in Taiwanese individuals exhibited variations between the mandibular first and second molars. However, these differences were not influenced by gender or age.

Influence of implant length and insertion depth on primary stability of short dental implants: An in vitro study of a novel mandibular artificial bone model.

Background/purpose: Dental implants are a mainstream solution for missing teeth. For the improvement of dental implant surface treatment and design, short dental implants have become an alternative to various complex bone augmentation procedures, especially those performed at the posterior region of both the maxilla and mandible. The objective of this study was to evaluate the effect of various insertion methods on the primary stability of short dental implants. Materials and methods: Commercial dental implants were inserted into artificial mandibular bone specimens using various insertion methods (equicrestal position, subcrestal position 1.5 mm, and lateral cortical anchorage) in accordance with an implant surgical guide. Insertion torque value (ITV) curves were recorded while implant procedures were performed. Both maximum ITVs (MITVs) and final ITVs (FITVs) were evaluated. Subsequently, Periotest values (PTVs) and implant stability quotients (ISQs) were measured for all specimens. A Kruskal-Wallis test was conducted to analyze the results for four primary stability parameters, and the Dunn test was used for a post hoc pairwise comparison when a difference was identified. Results: For all groups, their mean MITVs ranged from 33.6 to 59.4 N cm, whereas their mean FITVs ranged from 17.5 to 43.5 N cm. Insertion torque value, ISQ, and PTV decreased significantly when implants were inserted into subcrestal positions. When implants were inserted in the lateral bicortical position, the four aforementioned parameters yielded greater values. Conclusion: When 6-mm short implants were inserted in a lateral cortical anchorage position, high primary stability was yielded.

Integrated RNA expression and alternative polyadenylation analysis identified CPSF1-CCDC137 oncogenic axis in lung adenocarcinoma.

This study aims to analyze the RNA expression and alternative polyadenylation (APA) events and identify APA tuned genes with prognostic significance in lung adenocarcinoma (LUAD). Genome-wide RNA expression profile and APA events were acquired in LUAD cancer and normal samples in GSE197346. Comparative analysis screened common deregulated genes and transcripts. All 11 and 19 transcripts were up and down expressed and polyadenylated in cancer samples, respectively. Clinical analysis found eight genes with prognostic significance, such as coiled-coil domain containing 137 (CCDC137). Role of CCDC137 in LUAD was first reported in this study. The cellular and animal experiments indicated that downregulated CCDC137 suppressed the malignant tumor phenotype and tumor growth in LUAD. Then, to identify APA regulators for elevated CCDC137, we analyzed the expression of 26 APA regulators in GSE197346 and The Cancer Genome Atlas (TCGA), and found 4 differential regulators: CPSF1, CELF2, NUDT21, and ELAVL1. At last, the correlation of eight genes with four differential APA regulators was analyzed, and CPSF1 showed a strong positive correlation with CCDC137. Based on the above results, we propose an oncogenic axis of CPSF1-CCDC137 in LUAD. This study first constructed a polyadenylation tuned RNA expression map in LUAD, and the proposed oncogenic axis of CPSF1-CCDC137 would shed light on the pathogenesis of LUAD.

A rapid total bacterial count method using gold nanoparticles conjugated with an aptamer for water quality assessment.

Total bacterial count is a routine parameter in microbial safety assessment used in many fields, such as drinking water and industrial water testing. The current gold standard method for counting bacteria is the plate culture method (or heterotrophic plate count) that requires a microbiology laboratory and a long turnover time of at least 24 hours. To tackle these shortcomings, we developed a rapid total bacterial count method that relies on gold nanoparticles (AuNPs) conjugated with affinity ligands to stain bacterial cells captured on a syringe filter. Two affinity ligands were exploited, i.e. a DNA aptamer (AB2) and a lectin Griffonia simplicifolia II (GSII) that recognize bacterial cell wall commonalities, i.e. peptidoglycan and its amino sugars. Upon proper formulation with addition of a surfactant, the AB2 conjugated AuNPs (AB2-AuNPs) can selectively stain bacterial cells captured on the filter membrane with a higher sensitivity than GSII-AuNPs. Measuring the staining intensity using an in-house-built handheld detector allowed us to correlate its intensity reading with the total number of bacterial units present. This bacteria quantification method, referred to as "Filter-and-Stain", had an efficient turnover time of 20 min suggesting its potential usage for rapid on-site applications. Additionally, the detection sensitivity provided by the AB2-AuNP nanoreagent offered a limit of detection as low as 100 CFU mL-1. We have demonstrated the use of the AB2-AuNPs for detection of bacteria from environmental water samples.

4D-Printed Hydrogel Actuators through Diffusion-Path Architecture Design.

Recently, smart hydrogels have garnered considerable attention as biomedical devices, and several approaches have been introduced for their fabrication, including the incorporation of stimulus-responsive additives, utilization of molecular imprinting techniques, and application of multilayered hydrogels. However, the nonuniform properties resulting from these approaches limit the practical applications of hydrogels by causing inconsistent performance and behavior. In this study, we propose a novel approach to manipulating the swelling kinetics of hydrogels by engineering their diffusion-path architecture. By simply adjusting the diffusion path length within the hydrogel, we achieved a significant change in swelling kinetics. This approach enables precise control over the diffusion and transport processes within the hydrogel, resulting in enhanced swelling kinetics when reducing the diffusion path length. Furthermore, by strategically designing the diffusion-path architecture of a 3D-printed hydrogel specimen, we can fabricate smart hydrogel actuators that exhibit reversible shape transformations during swelling and deswelling through a nonequilibrium differential swelling. The proposed approach eliminates the need to modify the spatial properties of hydrogel structures such as cross-linking density, polymer, or additive compositions, thereby achieving uniform properties throughout the hydrogel and creating new possibilities for the development of advanced 4D-printed biomedical devices.

Rhizoma Atractylodis Macrocephalae-Assessing the influence of herbal processing methods and improved effects on functional dyspepsia.

Background: The unique pharmaceutical methods for the processing of botanical drugs according to the theory of traditional Chinese medicine (TCM) affect clinical syndrome differentiation and treatment. The objective of this study was to comprehensively elucidate the principles and mechanisms of an herbal processing method by investigating the alterations in the metabolites of Rhizoma Atractylodis Macrocephalae (AMR) processed by Aurantii Fructus Immaturus (AFI) decoction and to determine how these changes enhance the efficacy of aqueous extracts in treating functional dyspepsia (FD). Methods: A qualitative analysis of AMR before and after processing was conducted using UPLC-Q-TOF-MS/MS, and HPLC was employed for quantitative analysis. A predictive analysis was then conducted using a network analysis strategy to establish a botanical drug-metabolite-target-disease (BMTD) network and a protein-protein interaction (PPI) network, and the predictions were validated using an FD rat model. Results: A total of 127 metabolites were identified in the processed AMR (PAMR), and substantial changes were observed in 8 metabolites of PAMR after processing, as revealed by the quantitative analysis. The enhanced aqueous extracts of processed AMR (PAMR) demonstrate improved efficacy in treating FD, which indicates that this processing method enhances the anti-inflammatory properties and promotes gastric motility by modulating DRD2, SCF, and c-kit. However, this enhancement comes at the cost of attenuating the regulation of motilin (MTL), gastrin (GAS), acetylcholine (Ach), and acetylcholinesterase (AchE). Conclusion: Through this series of investigations, we aimed to unravel the factors influencing the efficacy of this herbal formulation in improving FD in clinical settings.

Comparison sealing ability in three bioceramic sealers applied in hydraulic condensation technique by using micro-computed tomography.

Background/purpose: Sealing ability in root canal obturation has always been a key concern for endodontic success. The purpose of this study was to analyze the percentage of voids in root canal space obturated by using single cone hydraulic condensation with different root canal sealers and to compare those with AH Plus sealer. Materials and methods: Experiments were conducted using twenty 3D-printed upper first premolars. After the buccal root canals were prepared using Ni-Ti rotary instruments, the teeth were divided into four groups: the AH Plus, BC sealer, BC sealer HiFlow, and Endoseal MTA groups. All buccal canals were obturated by single-cone hydraulic condensation. All specimens were scanned using micro-computed tomography and the percentage volume of the voids inside and outside the filled materials (Vin and Vout) at three different canal depth intervals were calculated by a Bruker micro-CT software. Differences according to root canal sealers were evaluated statistically using the Kruskal-Wallis test and the Wilcoxon Rank Sum test at a significance level of 0.05. Results: The results indicated that most of the voids were presented near the interface (Vout), the Vin is very small and not significant different between groups. The Vout decreased in the following order: AH Plus(1.837% ± 1.226%)≅BC sealer (1.225% ± 0.836%)>BC sealer Hiflow(0.349% ± 0.071%)>Endoseal MTA(0.203% ± 0.049%). Conclusion: For the percentage volume of voids between the root canal filling material and root canal surface, though the BC sealer Hiflow is slightly larger than Endoseal MTA, which is still much less than BC sealer and AH Plus.

Bioinformatics prediction and experimental verification identify cuproptosis-related lncRNA as prognosis biomarkers of hepatocellular carcinoma.

Cuproptosis is a form of cell death caused by intracellular copper excess, which plays an important regulatory role in the development and progression of cancers, including hepatocellular carcinoma (HCC), a prevalent malignancy with high morbidity and mortality. This study aimed to create a cuproptosis associated long non-coding RNAs (CAlncRNAs)signature to predict HCC patient survival and immunotherapy response. Firstly, we identified 509 CAlncRNAs using Pearson correlation analysis in The Cancer Genome Atlas (TCGA) datasets, before the three CAlncRNAs (MKLN1-AS, FOXD2-AS1, LINC02870) with the most prognostic value were further screened. Then, we constructed a prognostic risk model for HCCwas using univariate and LASSO Cox regression analyses. Multivariate Cox regression analyses illustrated that this model was an independent prognostic factor for overall survival (OS) prediction, outperforming traditional clinicopathological factors. And the risk score not only could be prognostic factors independent of other factors but also suited for patients with diverse ages, stages, and grades. The 1-, 3-, and 5- years areas under the curves (AUC) values of the model were 0.759, 0.668 and 0.674 respectively. Pathway analyses showed that the high-risk groupenriched in immune-related pathways. Importantly, patients with higher risk scores exhibited higher mutation frequency, higher TMB scores, and lower TIDE scores. Besides, we screened for two chemical drugs (A-443654 and Pyrimethamine) with the greatest value for high-risk HCC patients. Finally, the abnormal high expression of the three CAlncRNAs were confirmed in HCC tissues and cells by Real Time Quantitative PCR (RT-qPCR). And proliferative, migratory and invasion abilities of HCC cell were restrained via silencing CAlncRNAs expression in vitro. In summary, we built a CAlncRNAs-based risk score model, which can be a candidate for HCC patients prognostic prediction and offer some useful information for immunotherapies.

Optogenetic Activation of Astrocytes Reduces Blood-Brain Barrier Disruption via IL-10 In Stroke.

Optogenetics has been used to regulate astrocyte activity and modulate neuronal function after brain injury. Activated astrocytes regulate blood-brain barrier functions and are thereby involved in brain repair. However, the effect and molecular mechanism of optogenetic-activated astrocytes on the change in barrier function in ischemic stroke remain obscure. In this study, adult male GFAP-ChR2-EYFP transgenic Sprague-Dawley rats were stimulated by optogenetics at 24, 36, 48, and 60 h after photothrombotic stroke to activate ipsilateral cortical astrocytes. The effects of activated astrocytes on barrier integrity and the underlying mechanisms were explored using immunostaining, western blotting, RT-qPCR, and shRNA interference. Neurobehavioral tests were performed to evaluate therapeutic efficacy. The results demonstrated that IgG leakage, gap formation of tight junction proteins, and matrix metallopeptidase 2 expression were reduced after optogenetic activation of astrocytes (p<0.05). Moreover, photo-stimulation of astrocytes protected neurons against apoptosis and improved neurobehavioral outcomes in stroke rats compared to controls (p<0.05). Notably, interleukin-10 expression in optogenetic-activated astrocytes significantly increased after ischemic stroke in rats. Inhibition of interleukin-10 in astrocytes compromised the protective effects of optogenetic-activated astrocytes (p<0.05). We found for the first time that interleukin-10 derived from optogenetic-activated astrocytes protected blood-brain barrier integrity by decreasing the activity of matrix metallopeptidase 2 and attenuated neuronal apoptosis, which provided a novel therapeutic approach and target in the acute stage of ischemic stroke.

New classification for bone type at dental implant sites: a dental computed tomography study.

OBJECTIVE: This study proposed a new classification method of bone quantity and quality at the dental implant site using cone-beam computed tomography (CBCT) image analysis, classifying cortical and cancellous bones separately and using CBCT for quantitative analysis. METHODS: Preoperative CBCT images were obtained from 128 implant patients (315 sites). First, measure the crestal cortical bone thickness (in mm) and the cancellous bone density [in grayscale values (GV) and bone mineral density (g/cm3)] at the implant sites. The new classification for bone quality at the implant site proposed in this study is a "nine-square division" bone classification system, where the cortical bone thickness is classified into A: > 1.1 mm, B:0.7-1.1 mm, and C: < 0.7 mm, and the cancellous bone density is classified into 1: > 600 GV (= 420 g/cm3), 2:300-600 GV (= 160 g/cm3-420 g/cm3), and 3: < 300 GV (= 160 g/cm3). RESULTS: The results of the nine bone type proportions based on the new jawbone classification were as follows: A1 (8.57%,27/315), A2 (13.02%), A3 (4.13%), B1 (17.78%), B2 (20.63%), B3 (8.57%) C1 (4.44%), C2 (14.29%), and C3 (8.57%). CONCLUSIONS: The proposed classification can complement the parts overlooked in previous bone classification methods (bone types A3 and C1). TRIAL REGISTRATION: The retrospective registration of this study was approved by the Institutional Review Board of China Medical University Hospital, No. CMUH 108-REC2-181.

Determination of 44 major components and chemical profiling of saccharide in Chinese medicinal formula Lanqin Oral Liquid.

INTRODUCTION: Lanqin Oral Liquid (LQL) is a traditional Chinese medicine preparation (TCMP) containing five herbal medicines and has been commonly used for the treatment of pharyngitis and hand-foot-and-mouth disease in clinic. The material basis of LQL has been reported in our previous study, but the contents of the major components and the features of saccharide in LQL are still unclear. OBJECTIVES: This study aimed to establish accurate and rapid methods for the quantification of the major components and profiling of saccharide in LQL. The quantitative results combined with similarity evaluation were applied to improve the quality control of LQL. METHODOLOGY: An ultra-high performance liquid chromatography coupled with triple-quadrupole tandem mass spectrometry (UPLC-QQQ-MS) method was utilised to determine 44 major components. Cosine similarity was used to evaluate the similarities among 20 batches of LQL based on the quantitative results of 44 major components. The physicochemical properties, structure, composition, and contents of saccharide in LQL were detected by a combination of chemical and instrumental analysis. RESULTS: A total of 44 compounds, including flavonoids, iridoid glycosides, alkaloids, and nucleosides, were accurately determined. The 20 batches of LQL were remarkably similar (> 0.95). In addition, d-glucose, galactose, d-glucuronic acid, arabinose, and d-mannose were detected in saccharide of LQL. The contents of saccharide in LQL were 13.52-21.09 mg/ml. CONCLUSIONS: The established methods can be applied for the comprehensive quality control of LQL, including characterisation of saccharide and quantification of representative components. Our study will provide a robust chemical foundation for disclosing the quality markers of its therapeutic effect.